咨询热线

18948178581

当前位置:首页  >  产品展示  >    >    >  srs CTC100-Cryogenic temperature controller

srs CTC100-Cryogenic temperature controller

简要描述:srs CTC100-Cryogenic temperature controller

  • 产品型号:CTC100
  • 厂商性质:经销商
  • 更新时间:2023-03-07
  • 访  问  量:655

详细介绍

  •  

srs CTC100-Cryogenic temperature controller

 

主要指标与说明Introducing the new CTC100 Cryogenic Temperature Controller-a high performance instrument that can monitor and control temperatures with millikelvin resolution.The CTC100 Cryogenic Temperature Controller is configured to suit a wide range of research and industrial applications. The system consists of four sensor inputs, two powered and four analog voltage outputs, and up to six feedback control loops.

 

CTC100 Cryogenic Temperature Controller4 temperature sensor inputs2 powered & 4 analog voltage outputsUp to 6 feedback control loops4 analog & 8 digital I/O channelsGraphical touchscreen display Data loggingUser programs (macros)USB, Ethernet, RS232 & GPIBCTC100 Cryogenic Temperature ControllerIntroducing the new CTC100 Cryogenic Temperature Controller-a high performance instrument that can monitor and control temperatures with millikelvin resolution.The CTC100 Cryogenic Temperature Controller is configured to suit a wide range of research and industrial applications. The system consists of four sensor inputs, two powered and four analog voltage outputs, and up to six feedback control loops. Four general purpose analog and eight digital I/Os are available, along with autotuning functions for setting PID parameters automatically.Sensor InputsThe CTC100 offers four temperature inputs that can read RTDs, thermistors, and diodes. Each temperature input channel has its own 24-bit ADC with eleven input ranges, and is equipped with its own independent excitation current source.Channel setup menuStandard calibration curves for a variety of sensors are included, and custom calibration curves of up to 200 points each can be entered. Each sensor input has high and low level or rate-of-change alarms. Sensor inputs can be lowpass-filtered to reduce noise, and/or differenced with another channel.Powered and Analog Voltage OutputsThe CTC100 has two heater outputs that can each deliver up to 100 W of power to a 25 ? heater. In addition, four analog voltage I/O channels can be used to drive heaters with the help of an external amplifier.Select menuPID Feedback ControlWith up to six feedback control loops available, the CTC100 can provide precise temperature control of each of its heater outputs by continually adjusting the heater power. Any of the CTC100’s channels can be selected as the input for each feedback loop. Feedback time constants can be adjusted between 200 ms and 10 hrs.Up to ten sets of PID parameters can be stored for each channel. Setpoints can be ramped at a fixed rate (or with a user program), set from an analog input.Numeric displayAnalog and Digital I/OsThe CTC100 comes with four general-purpose ±10 V voltage I/O channels read by a 24-bit ADC. It also has eight digital I/O channels that can interact with user programs.Four 5 A relays can be used for process control. Three virtual channels, not connected to any physical input, allow calculated values (such as the difference between two channels, or a value calculated by a user program) to be displayed, graphed, and logged.

 

Numeric and Graphical DisplayThe CTC100’s color LCD display can show any combination of temperature measurements and heater outputs on graphs or numeric displays. Up to eight channels can be plotted either on a single graph with a common Y axis, or on separate graphs with independent Y axes. Touchscreen operation makes the instrument versatile and easy to use.Data LoggingUp to 4096 readings per channel can be logged to the CTC100’s internal memory. For longer-term storage, data can be logged to standard USB memory sticks or hard drives.Data logged to USB devices can be transferred to a computer by plugging the USB device into a PC. Windows applications are included to graph CTC100 log files and to convert them to various ASCII text formats.Computer CommunicationsEach of the CTC100’s front-panel controls has a corresponding text command that can be sent over USB, Ethernet, and either RS-232 or an optional GPIB interface.When the USB interface is used, the CTC100 appears on the computer as a standard COM port and can be controlled by any software that is compatible with an RS-232 port.User ProgramsUser programs (macros), consisting of one or more remote commands, can be uploaded to the CTC100. this done by either sending them through one of the communications ports or by saving them as text files on a USB memory device and then plugging the device into the CTC100. Program macros can also be entered and edited from the front panel.CTC100 Cryogenic Temperature ControllerTemperature ControllerMin. sampling rate 1 HzMax. sampling rate 50 to 60 Hz (depending on AC line frequency)Data logging rate 10 samples/second/channel to 1 sample/hour/channel(can be set independently for each channel or globally for all channels)Display resolution 0.001°C, °F, K, V, A, W, etc.if –1000 < displayed value < 1000; 6 significant figures otherwisePID autotuning Single step response or relay tuning with conservative, moderate, and aggressive response targetsDisplay 320 × 240 pixel color touchscreen; numeric and graphical data displays.Alarms Upper and lower temperature limits or rate-of-change limits can be set on each channel.Computer interface USB, Ethernet, and RS-232; GPIB (IEEE488.2) optionalPower 10 A, 88 to 132 VAC or 176 to 264 VAC, 47 to 63 Hz or DCDimensions 8.5" × 5" × 16" (WHL)Weight 13 lbs.Warranty One years parts and labor on defects in material and workmanshipAnalog I/OInputs/outputs 4 voltage I/O channels, independently configurable as inputs or outputsConnector 4 BNC jacksRange ±10VResolution 24-bit input, 16-bit outputADC noise 30μVrms (at 10 samples/s)Digital I/OInputs/ Outputs 8 optoisolated TTL lines, configurable as either 8 inputs or 8 outputsConnector One DB-25FRelaysOutputs 4 independent SPDT relays100 W DC OutputOutput Two unipolar DC current sourcesConnector #6 screw terminalsRange 50V 2A, 50V 0.2A, 50V 0.02A,20V 2A, 20V 0.2A, 20V 0.02AOutput resolution 16 bitAccuracy ±1mA (2A range)±0.02mA (0.2A range)±0.002mA (0.02A range)Noise (rms) (25 ? load, DC to 10 Hz)5 μA (2A range)0.5μA (0.2A range)0.05μA (0.02A range)

 

Diodes, Thermistors and RTDs InputsInputs Four inputs for 2-wire or 4-wire thermistor, diode, or RTDSocket Two DB9 (female)Diodes Input Range Excitation Current Initial Accuracy Temp. Drift (typ.)(at midrange) Noise (rms)(at midrange) 0 to 2.5 V 10 μA 10 μV+ 0.01 % of reading ±5 ppm/°C 3 μVThermistors Input Range Excitation current Initial accuracy Temp. Drift (typ.)(at midrange) Noise (rms)(at midrange) 0 to 10 Ω 1 mA ±0.007 Ω ±0.0002 Ω/°C 0.0003 Ω 0 to 30 Ω 300 μA ±0.03 Ω ±0.0004 Ω/°C 0.001 Ω 0 to 100 Ω 100 μA ±0.07 Ω ±0.002 Ω/°C 0.002 Ω 0 to 300 Ω 30 μA ±0.25 Ω ±0.004 Ω/°C 0.006 Ω 0 to 1 kΩ 10 μA ±0.6 Ω ±0.01 Ω/°C 0.02 Ω 0 to 3 kΩ 3 μA ±2 Ω ±0.06 Ω/°C 0.06 Ω 0 to 10 kΩ 1 μA ±6 Ω ±0.2 Ω/°C 0.2 Ω 0 to 30 kΩ 300 nA ±25 Ω ±1 Ω/°C 1.0 Ω 0 to 100 kΩ 100 nA ±150 Ω ±3 Ω/°C 6 Ω 0 to 300 kΩ 30 nA ±1 kΩ ±20 Ω/°C 40 Ω 0 to 2.5 MΩ 1 μA ±1 kΩ ±30 Ω/°C 10 ΩRTDs Input Range Excitation current Initial accuracy Temp. Drift (typ.)(at midrange) Noise (rms)(at midrange) 0 to 10 Ω 3 mA ±0.005 Ω ±0.0001 Ω/°C 0.0001 Ω 0 to 30 Ω 3 mA ±0.005 Ω ±0.0001 Ω/°C 0.0001 Ω 0 to 100 Ω 2 mA ±0.008 Ω ±0.0002 Ω/°C 0.0002 Ω 0 to 300 Ω 1 mA ±0.015 Ω ±0.0004 Ω/°C 0.0003 Ω 0 to 1 kΩ 500 μA ±0.05 Ω ±0.001 Ω/°C 0.0007 Ω 0 to 3 kΩ 200 μA ±0.1 Ω ±0.003 Ω/°C 0.002 Ω 0 to 10 kΩ 50 μA ±0.25 Ω ±0.01 Ω/°C 0.007Ω 0 to 30 kΩ 50 μA ±1 Ω ±0.02 Ω/°C 0.008 Ω 0 to 100 kΩ 5 μA ±4 Ω ±1 Ω/°C 0.12 Ω 0 to 300 kΩ 5 μA ±13 Ω ±2 Ω/°C 0.2 Ω 0 to 2.5 MΩ 1 μA ±1 kΩ ±50 Ω/°C 10 Ω

 

Agilent 83497A 光电时钟恢复模块

 

Agilent 8157A 光衰减仪

 

Agilent 81637B 快速功率计

 

Agilent 34570A 数字万用表

 

Agilent 44476A 微波复用器模块

 

Agilent 70004A 光谱分析仪

 

Agilent 81000FI 光纤连接器

 

Agilent 81002FF 积分球

 

Agilent 81521B 光功率计探头

 

Agilent 81524A 光功率探头

 

Agilent 81525A 大功率光学探头

 

Agilent 81533A 接口模块

 

Agilent 81533B 接口模块

 

Agilent 81536A 光功率计传感插件

 

Agilent 81560A 可变光衰减器

 

Agilent 81567A 可变光衰减器模块

 

Agilent 8156A 光衰减器

 

Agilent 81578A可变光衰减器模块

 

Agilent 81610A回损测试模块

 

Agilent 81619A 光功率模块

 

Agilent 81624A 光学探头

 

Agilent 81625A 光功率探头

 

Agilent 81633A 分布式反馈(DFB)激光器

 

Agilent 81635A 双光功率传感器

 

Agilent 8163A光功率计主机

 

Agilent 8163B 光功率计

 

Agilent 8164A 光波测量系统主机

 

Agilent 81650A 单法布里-珀罗激光源

 

Agilent 81651A 光源模块

 

Agilent 81654A 法布里-珀罗激光源

 

Agilent 81662A 分布式反馈(DFB)激光器

 

Agilent 8168E 可调谐激光源

 

Agilent 83440D光波转换器

 

Agilent 83480A 数字通信分析仪

 

Agilent 83483A 双通道电模块

 

Agilent 83486A 光电模块

 

Agilent 83487A 光电模块

 

Agilent 83492A 多模时钟模块

 

Agil

产品咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7