srs SR470-Laser shutters & controllers

srs SR470-Laser shutters & controllers

主要指标与说明Introducing two new optical shutter systems from SRS-the SR470 Laser Shutter Controller and SR474 Four-Channel Laser Shutter Driver. These shutter systems are designed specifically to minimize vibration on your optical table. They are built around a unique shutter head, supported by one of two available controller models. The SR470 provides timing signals to a single shutter head, while the multi-channel SR474 drives up to four shutter heads, and is controlled by external timing signals.

SR470 and SR474 Shutter SystemsUltra-low vibration shutter headTrue mechanical laser beam blocking>10 M cycle lifetimeMicroprocessor controlled timingDC to 125 HzEasy to align 3 mm apertureGPIB, RS-232, Ethernet interfacesSR470 and SR474 Shutter SystemsIntroducing two new optical shutter systems from SRS-the SR470 Laser Shutter Controller and SR474 Four-Channel Laser Shutter Driver. These shutter systems are designed specifically to minimize vibration on your optical table.They are built around a unique shutter head, supported by one of two available controller models. The SR470 provides timing signals to a single shutter head, while the multi-channel SR474 drives up to four shutter heads, and is controlled by external timing signals.The Shutter HeadUnlike conventional solenoid based shutters, the SR475 and SR476 shutter heads contain a closed-loop DSP control system that precisely guides the shutter blade between open and closed positions, never encountering physical stops. Vibration and mechanical noise are kept to a minimum, leaving your optical table disturbance-free.The shutter blade is mounted between sapphire jewel bearings that minimize friction and result in a head lifetime in excess of 10 M cycles-orders of magnitude more than is typically found in shutter heads.The 3 mm clear aperture (SR475) is designed for easy alignment and is large enough to be used with common light sources. Typical rise and fall times are under 500 μs, and repetition rates from DC to 100 Hz can be used. Unlike other shutters, the SRS shutter is not duty cycle limited-you can run any duty cycle you choose. The SR476 has a 1 mm clear aperture and supports repetition rates to 125 Hz.

SR470 ControllerSR475 head with cover removed revealing control system electronicsThe SR470 Shutter Controller allows you to generate timing signals for the shutter head. You have complete control of the exposure time, which can be set between 4 ms and 10,000 s with 0.1 ms resolution. Pre- and post-exposure delays can also be configured. A bright green 8-digit LED display shows the current parameter in seconds or hertz, and timing is accurate to 100 ppm.A variety of trigger modes are provided-internal, external, front panel, and continuous-giving you the flexibility to handle just about any application. Triggered bursts from milliseconds to months can also be generated, placing the SR470 in a class of its own.In addition to triggered sequences, the SR470 can also act as a driver to actuate the shutter head from your own timing signals. You can also manually control the shutter from the front panel.Remote operation is supported with GPIB, RS-232 and Ethernet computer interfaces. All instrument functions can be controlled and read over any of the interfaces. Up to nine complete instrument configurations can be saved in non-volatile RAM and recalled at any time. Shutter faults are automatically detected and reported with audible and electronic (TTL) alarms.SR474 Four-Channel DriverThe SR474 Four-Channel Driver interfaces with up to four shutter heads. Rear-panel TTL level inputs are provided for your external timing signals. Each of the four channels can be set for normally open or normally closed operation.Each channel has a front-panel State button which allows you to manually change the shutter state. The channel Source buttons set each channel to manual, external TTL or remote state control. Each channel also has an Align button that drives its shutter head at a 1 Hz rate making laser alignment simple. The Global Control section of the front-panel allow you to set or reset all channels to their “normal" states.As with the SR470, remote operation is supported with GPIB, RS-232 and Ethernet computer interfaces. All instrument functions can be controlled and read over any of the interfaces. Shutter faults are automatically detected and result in audible, visible and electronic alarms.About the Shutter HeadSR475 Dimensional Drawing (in inches)Unlike conventional designs, the SR475/476 Shutter Head can be mounted on your optical table in any orientation. This gives you complete flexibility to route the mating cable out of the way of your experiment.The 3 mm aperture is positioned very close to the chassis edge, making the SR475 and SR476 ideal for chopping one of two parallel beams separated by less than a centimeter. It also allows you to operate your lasers very close to the plane of your optical table top.The small size of the shutter heads make them ideal in tight quarters, and with a precision guided blade, shutter vibration is essentially eliminated.

深圳市美佳特科技有限公司（简称“美佳特"）成立于2010年，致力于光通讯测试、通用电子测量及5G测试服务。美佳特以“无线沟通，沟通无极限 "企业使命，业务聚焦于精密测试测量仪器的租赁、销售、维护、计量及测试环境搭建等一站式服务。srs SR470-Laser shutters & controllers

主营产品：示波器主机和模块、眼图仪、光谱仪、信号源、频谱分析仪、网络分析仪、阻抗分析仪、光通信仪器、误码仪、光时域反射仪、可调谐激光源、光功率计、光衰减器等。合作品牌：安捷伦、是德、泰克、安立、爱得万、安腾、力科、马可尼（IFR）、R&S、EXFO等。

主推：Agilent 86100D/C 示波器,keysight M8195A 任意波形发生器,Anritsu MS9740B/A 光谱分析仪,YOKOGAWA AQ6370D/E 光谱分析仪,keysight N1092A/C 采样示波器,keysight E8257D 模拟信号发生器,keysight E5071C 矢量网络分析仪