srs SR245-Computer interface （GPIB & RS-232）

srs SR245-Computer interface (GPIB & RS-232)

主要指标与说明The SR245 Computer Interface module is a powerful tool for data acquisition. It provides both an analog and a digital interface between your computer and your experiment.SR245 Computer InterfaceEight analog I/O ports8-bit digital I/O portTwo TTL I/O portsRS-232 and GPIB interfaces3500 point sample memorySimple command structure

SR245 Computer InterfaceThe SR245 Computer Interface module is a powerful tool for data acquisition. It provides both an analog and a digital interface between your computer and your experiment.Analog I/OThe eight analog I/O channels can be designated through software as all inputs, all outputs, or as a combination of inputs and outputs. All channels have 13 bits of resolution over the ±10.24 VDC full-scale range, with 0.05 % accuracy.Digital I/OTwo front-panel digital I/O bits are provided for use as counters or triggers and can be set or read by the computer. Additionally, an 8-bit input and an 8-bit output port are available (on an internal connector) for your own custom digital interfaces.

RS-232 and GPIB interfacesBoth RS-232 and GPIB interfaces are standard features of the SR245. Simple commands make programming easy from a variety of high level languages-all that's necessary is the ability to send and receive ASCII strings. For example, sending "?5" instructs the module to measure the voltage on the 5th analog input BNC. Other commands allow you to record in the module's 3500 point buffer memory, ramp an analog output at a specified rate (for gate scanning), or read the contents of a digital counter. SR245 Computer InterfaceAnalog PortsConfiguration Any number of the eight ports may be designated under program control as input ports, the rest default to output ports.Inputs 1 MΩ impedance, ±10.24 VDC range, protected to 40 VDC. 13-bit resolution (2.5 mV). 0.5 % accuracy. Input offset <2.5 mV. Maximum A/D rate is 2 kHz.Outputs <1 Ω impedance. Short circuit current limit is 20 mA. 13-bit resolution (2.5 mV), 0.5 % accuracy. Output offset <2.5 mVDigital PortsType Two front-panel I/O TTL bits, one 8-bit digital input port, one 8-bit latched digital output portFront-panel inputs Input impedances >100 kΩ. Minimum pulse width is 200 ns. Maximum count rate is 4 MHz. Logic one >3 VDC, logic zero <0.7 VDC. Inputs protected to ±10 VDCFront-panel outputs Can drive 50 Ω loads to TTL levels

GeneralInterfaces IEEE-488 (GPIB) and RS-232 (110 baud to 19.2 kbaud)Power +24 V/60 mA, 24 V/60 mA, +12 V/20 mA, approx. 8 wattsMechanical Single-width standard NIM moduleWarranty One year parts and labor on defects in materials and workmanshipInput/Output CommandsI n=0 to 8 Designates the first n analog ports as inputs, the remainder become outputs.? n=1 to 8 Returns the value of the designated analog port.?B n=1,2 Returns the value (0 or 1) of the designated digital port.?D Returns the value of the 8-bit digital input port.?S Returns the value of the status byte, and clears the status byte.C Configures B2 as an input and resets the B2 counter.?C Returns number of pulses occurring at B2 since the previous ?C.S= Sets the analog port n (which must be designated as an output) to the value x (x=-10.237 to +10.237 V). n=1 to 8SB= Designates digital bit n as output and sets its value to m (n=1, 2 and m=0, 1)SB=I Designates the selected bit as an input (n=1, 2)SD= Sets the 8-bit digital output port to the value n (n=0 to 255)SM= Sets the GPIB SRQ mask to the value n (n=0 to 255)Trigger CommandsMS Sets the synchronous mode. Responses to ? commands are returned after next trigger.MA Sets the asynchronous mode (default). Responses to ? commands are returned after command is received.T Designates every nth pulse at B1 as a trigger (n=1 to 32,767)DT Masks the trigger input so that no triggers are recognizedET Unmasks the trigger inputPB Outputs a 10 μs TTL pulse at digital port n (n=1, 2)P/ Outputs a 10 μs TTL pulse at B2 each nth trigger (n=1 to 255)Scan CommandsSC,: Scans the list i..k of analog ports or digital port for n triggers. Total # of samples may not exceed 3711. (i..k=1 to 8, D)ES Ends the current scan immediay and resets the point sending counter.N Sends the next point of stored scan?N Returns # of points scannedA, Adds n × 2.5 mV to the value of analog port 8 (must be positive) on every ith trigger (n,i=1 to 255)SS,: Scans the list i..k of analog ports or digital port for n triggers. Data is sent in a 2 byte binary format while scan is in progress.(i..k=1 to 8, D)X Sends the data of a stored scan in 2 byte binary format.Miscellaneous CommandsMR Master Reset. Returns the SR245 to its default values.W Introduces a delay of (n × 400 μs) before sending each character over the RS-232 interface. (n=0 to 255)Z, Changes the end-of-record characters sent by SR245 to those specified by the ASCII codes, i...k

Agilent 83497A 光电时钟恢复模块

Agilent 8157A 光衰减仪

Agilent 81637B 快速功率计

Agilent 34570A 数字万用表

Agilent 44476A 微波复用器模块

Agilent 70004A 光谱分析仪

Agilent 81000FI 光纤连接器

Agilent 81002FF 积分球

Agilent 81521B 光功率计探头

Agilent 81524A 光功率探头

Agilent 81525A 大功率光学探头

Agilent 81533A 接口模块

Agilent 81533B 接口模块

Agilent 81536A 光功率计传感插件

Agilent 81560A 可变光衰减器

Agilent 81567A 可变光衰减器模块

Agilent 8156A 光衰减器

Agilent 81578A可变光衰减器模块

Agilent 81610A回损测试模块

Agilent 81619A 光功率模块

Agilent 81624A 光学探头

Agilent 81625A 光功率探头

Agilent 81633A 分布式反馈(DFB)激光器

Agilent 81635A 双光功率传感器

Agilent 8163A光功率计主机

Agilent 8163B 光功率计

Agilent 8164A 光波测量系统主机

Agilent 81650A 单法布里-珀罗激光源

Agilent 81651A 光源模块

Agilent 81654A 法布里-珀罗激光源

Agilent 81662A 分布式反馈(DFB)激光器

Agilent 8168E 可调谐激光源

Agilent 83440D光波转换器

Agilent 83480A 数字通信分析仪

Agilent 83483A 双通道电模块

Agilent 83486A 光电模块

Agilent 83487A 光电模块

Agilent 83492A 多模时钟模块

Agilent 83493A 单模时钟恢复模块

Agilent 83494A 单模时钟恢复模块

Agilent 83495A 时钟恢复模块

Agilent 83496A 光电时钟恢复模块

Agilent 86100A 光示波器

Agilent 86100C 宽带示波器主机

Agilent 86103A 光电模块

Agilent 86103B 光电模块

Agilent 86105A 光电模块

Agilent 86105B 光电模块

Agilent 86106B 光电模块

Agilent 86107A 精密时基参考模块

Agilent 86120B 多波长计

Agilent 86120C 多波长计

Agilent 86142B 高性能光谱分析仪

Agilent 86146b 光谱分析仪

Agilent N7740 多端口光功率计

Ando AQ2140光功率计

Ando AQ2730光功率计模块

Ando AQ2742 光功率传感器

Ando AQ2743 光功率传感器

Ando AQ4211LD组件

Ando AQ4215 光功率计

Andu AQ-4137 光源

Andu AQ-4142 光源

Anritsu 69347B 信号源

Anritsu MN9610B光衰减器

Anritsu ms9710c 光谱分析仪

Anritsu MS9740A 台式光谱分析仪

CVI Melles Griot 05-LHP-211-1 激光器

Ericsson FSU-975 光纤熔接机

Exfo IQS-3150 可变衰减器

EXFO WA-1650 光波长计

HP 8153A 光功率计

HP 8153B 光波万用表

HP 81551MM 点光源模块

HP 83540A 插件信号源

HP 8595E 频谱分析仪

IFR GPS-101定位系统模拟器

Jdsu HA9 光衰减器

JDSU OLP-55 光功率计

Keithley 7001半导体开关系统

Keithley 2001A 数字多用表

Keithley 2400 数字源表

Keithley 2400-C 数字源表

Keithley 2500 数字源表

Keithley 2502 数字源表

KEITHLEY 6221 电流源表

Keysight 11708A 衰减器垫

Keysight 3458A 数字多用表

Keysight 34903A GP开关模块

Keysight 81570A 可变光衰减器模块

Keysight 81618A 接口模块

Keysight 81623B 锗光功率探头

Keysight 81630B 大功率光传感器

Keysight 81634B 低偏振相关光功率传感器

Keysight 81636B 光功率传感器

Keysight 8164B 光波测量系统主机

Keysight 82357B GPIB 卡

Keysight 86100D 宽带宽示波器主机

Keysight 86105C 光电采样模块

Keysight 86105D 光电模块

Keysight E3631A 三路输出电源

Keysight J7231B 抖动通信性能分析仪

Keysight N5181A 射频模拟信号发生器

Keysight N5980A 比特误码率测试仪

Keysight N7744A 多端口光功率计

Keysight N7748A 高性能光功率计

Newport 818-IG高性能光电二极管传感器

Newport 918-IG 高性能光电二极管传感器

Newport 918-ir 高性能光电二极管传感器

NI PCI GPIB小卡

NI PXI-1031 板卡

Photom EP-712 光功率计

Picometrix PT-12B 光电转换芯片

R&S FSP3 频谱分析仪

R&S NRPZ51 射频功率计

R&S NRPZ55 射频功率计

R&S NRP-Z55 射频功率计

Tektronix DPP125B 误码仪

Tektronix 80C02 光采样模块

Tektronix 80E04 双通道时域反射计

Tektronix DSA8200 采样示波器

Tektronix DSA8300 数字采样示波器

USHIO UXM-Q256BY点光源

YOKOGAWA AQ2200-421 单槽型光开关

YOKOGAWA AQ2201 帧控制器主机

 光示波器/眼图仪—Agilent 86100A, Agilent 86100B, Agilent 86100C, Agilent 86100D,Agilent 86105A, Agilent 86105B, Agilent 86116C, Agilent 86105D, Agilent 86103A, Agilent 86106B, Agilent 86103B, Agilent 83493A, Agilent 83496A, Agilent 86118A, Agilent 54754A，Tektronix DSA 8300，Tektronix DSA 8200，Tektronix 80C08，Tektronix 80C15，Tektronix 80C07, Tektronix 82A04，Tektronix 80E04,Anritsu MP2100B光谱分析：Agilent 86142B, Agilent 86146B,Agilent 86140B,Anritsu MS9740A,Anritsu MS 9710C,Anritsu MS9710B,Yokogawa 6317B,Yokogawa:6370D波长计：Agilent 86122A,Agilent 86120B,Agilent 86120C,EXFO WA1600,EXFO WA1650,EXFO WA1100光衰减器：Agilent 8156A,Agil