CIP 9136型10 kHz～400 MHz电流注入探头

CIP 9136型10 kHz～400 MHz电流注入探头

符合英国国防标准59-41中的规定也满足DO-160C、HIRF用户指南ED 14CSAE和Euro CAE的要求汽车BCI测试的理想探头功率承载能力高达1kW频率范围宽，10 kHz～400 MHz提供校准夹具选项

The CIP 9136 probe has been manufactured to drawings and specifications laid down by QinetiQ. It meets the requirements for HIRF testing where conventional ferrite core material cannot handle the higher powers required (up to 1000 W), without changing characteristics when heated. Whilst having been initially designed to meet the specific requirements of Aircraft Testing from 10 kHz to 50 MHz, the CIP 9136’s unique non-ferrite core allows wide band performance from 10 kHz - 400 MHz, and above. The CIP 9136 core material is highly efficient and thermally rugged, thus allowing very high injected levels to be achieved with lower RF input powers. The core material can withstand far higher powers than conventional ferrite (up to 1000 W), which change characteristics in relation to the temperature.The probe material meets the requirements of ISO 11452-4, RTCA/DO-160 section 20, MIL-STD-461 and other standards. The probe performance can be measured using Calibration Jig PCJ 9201.The model CIP 9136A received a mechanical improvement, in difference to the original CIP 9136, for a better core positioning. this mandatory in the low frequency range and it improves the insertion loss.

Frequency range: 10 kHz - 400 MHzWindow diameter: 43 mmOutside diameter: 113 mmWidth: 61 mmWeight: approx. 2 kgInput connector: Type NMax. input power: 1000 WMax. time for continuous operation: related to the core temperature Rating at 10 kHz / 1000 W: approx. 10 min* Rating at 100 kHz / 500 W: approx. 7 min* Rating at 150 kHz / 500 W: approx. 5 min* Rating at 1 MHz to 400 MHz / 400 W: approx. 3 min*Max core temperature: 90?CTurns ratio: 1:1Primary inductance @ 1 MHz: 4.7 μH typicalSelf resonant frequency: 12 MHz typicalImpedance at resonance: 100 Ω typical *) Time based on a core temperature rise from 23°C to max. 90°C Part number Description 248525 CIP 9136A Current injection probe (BCI) 10 kHz-400 MHz 97-342-300 CIP-TC Traceable calibration (ISO17025), order only with CIP xxxx252052 PCJ 9201B Calibration jig for current probes, meets RTCA/DO-160 section 20, MIL-STD-461 and IEC/EN 61000-4-6

CIP 9136型10 kHz～400 MHz电流注入探头

深圳市美佳特科技有限公司（简称“美佳特"）成立于2010年，致力于光通讯测试、通用电子测量及5G测试服务。美佳特以“无线沟通，沟通无极限 "企业使命，业务聚焦于精密测试测量仪器的租赁、销售、维护、计量及测试环境搭建等一站式服务。N2843A Keysight 无源探头 Keysight 是德

主营产品：示波器主机和模块、眼图仪、光谱仪、信号源、频谱分析仪、网络分析仪、阻抗分析仪、光通信仪器、误码仪、光时域反射仪、可调谐激光源、光功率计、光衰减器等。合作品牌：安捷伦、是德、泰克、安立、爱得万、安腾、力科、马可尼（IFR）、R&S、EXFO等。N2843A Keysight 无源探头 Keysight 是德

主推：Agilent 86100D/C 示波器,keysight M8195A 任意波形发生器,Anritsu MS9740B/A 光谱分析仪,YOKOGAWA AQ6370D/E 光谱分析仪,keysight N1092A/C 采样示波器,keysight E8257D 模拟信号发生器,keysight E5071C 矢量网络分析仪