srs SR600 Series-Elliptical filters

srs SR600 Series-Elliptical filters

主要指标与说明The SR600 series consists of three dual-channel instruments. Each instrument channel has a low-noise preamplifier, a precision high-pass or low-pass filter section, and an output amplifier. The filters are 8-pole, 6-zero elliptic-type with 115 dB per octave rolloff, 0.1 dB of passband ripple, and 80 dB of stopband attenuation. Cutoff frequencies can be set between 1 Hz and 100 kHz making the SR600 Series ideal for applications including anti-aliasing, audio analysis, and frequency-domain signal conditioning.

SR600 Series Programmable FiltersTwo independent filter channels115 dB/octave rolloff1 Hz to 100 kHz frequency range0.1 dB passband ripple6 nV/√Hz input noiseUp to 80 dB of gainGPIB and RS-232 interfacesSR600 Series Programmable FiltersThe SR600 series consists of three dual-channel instruments. Each instrument channel has a low-noise preamplifier, a precision high-pass or low-pass filter section, and an output amplifier. The filters are 8-pole, 6-zero elliptic-type with 115 dB per octave rolloff, 0.1 dB of passband ripple, and 80 dB of stopband attenuation. Cutoff frequencies can be set between 1 Hz and 100 kHz making the SR600 Series ideal for applications including anti-aliasing, audio analysis, and frequency-domain signal conditioning.Model - ConfigurationSR640 - dual low-passSR645 - dual high-passSR650 - high-pass/low-pass (can be cascaded for Band -pass)Inputs and PreamplifiersEach filter channel has a floating, differential input with 1 MΩ input impedance and 6 nV/√Hz of input noise. The analog ground for each filter channel is available at a rear-panel BNC connector to provide complete flexibility in grounding. The filter grounds may be tied to the instrument's chassis ground or to any other point. Both AC and DC input coupling can be selected, and an invert key allows the phase of the signal to be shifted by 180° with a single key press. Up to 60 dB of preamplifier gain can be specified in 10 dB increments. A simple offset adjust screw lets you null DC components in your signal.Filter CharacteristicsFilter characteristics for the SR600 series are shown below. The exact filter transfer function is given in the specifications section. (The graph shows the low pass response. The high pass response is found by inverting the curve around f=1.) The large amount of excess phase, typical of elliptical filters, makes the SR600 series filters optimum in frequency-domain applications. Note that the 0.1 dB passband ripple specification for the SR640 series filters is a measured specification, not just the theoretical passband ripple of the transfer function. Other filter characteristics include an attenuation slope of -115 dB/octave and a stopband attenuation of greater than 80 dB. Worst-case phase match between channels is better than ±0.75° from DC to 100 kHz, and improves to ±0.25° for cutoff frequencies below 10 kHz. SR640 Gain ResponsePost-Filter Gain and BypassingAfter the filter, another amplifier section provides up to 20 dB additional gain. The standard output drives loads of greater than 300 Ω at 10 Vpp, while the optional high-power output drives 10 Vpp into a 50 Ω load. Each filter may be independently bypassed from the front panel or from the computer interface. When bypassed, both the prefilter and postfilter gains remain active, and the resulting amplifier has a bandwidth of 450 kHz.

ProgrammingA key feature of the SR600 series is its programmability. Both GPIB and RS-232 interfaces are standard, and all instrument settings can be queried and changed via the interfaces. Cutoff frequencies can be changed in under 100 ms, making the SR600 series ideal for applications involving frequency-agile filters. Careful attention has been paid to minimizing noise resulting from the presence of the microprocessor and GPIB and RS-232 interfaces. Both the interface electronics and the instrument's microprocessor control circuitry are optically isolated from the filter sections in order to reduce digital-analog crosstalk. The CMOS microprocessor "sleeps" while the interface and front panel are inactive in order to reduce the amount of digital noise in the instrument.Stored SettingsUp to nine complete instrument configurations, including amplifier gains and cutoff frequencies for both channels, can be stored in non-volatile memory for later recall. Settings can be recalled from the front panel or through the computer interfaces.SR600 Series Programmable FiltersFilterFrequency range 1 Hz to 100 kHz (3-digit resolution)Type 8-pole, 6-zero ellipticRolloff 115 dB/octavePassband ripple 0.1 dB peak to peak (typ.)Stopband attenuation 80 dB (typ.)Transfer Function (Bi-quad Cascade)Stage 1 ωp 0.634752 Q 0.543939 ωz NA Stage 2 ωp 0.805995 Q 0.950701 ωz 1.675935Stage 3 ωp 0.985073 Q 2.095314 ωz 1.935978Stage 4 ωp 1.076768 Q 7.375143 ωz 2.883197InputImpedance 1 MΩ // 15 pFConfiguration Single-ended (A or B) or differential (A-B)CMRR >85 dB at 100 Hz, (input gain >20 dB)Coupling AC or DCInput noise 6 nV/√Hz at 1 kHz (with 60 dB input gain)Gain 0, 10, 20, 30, 40, 50, 60 dB ±0.5 dBMax. input signal 10 Vpp (overload)5 Vpp (no distortion)

OutputImpedance <1 ΩFull-scale output signal 10 Vpp into >300 ΩOption 01 10 Vpp into 50 ΩDC offset Adjustable to 0 VGain 0,10, 20 dB ±0.5 dBHarmonic distortion (<1 Vpp output) <-80 dB below full scale at 100 Hz<-50 dB below full scale at 1 kHzSpurious components <-80 dB below full scale (with input source <50 Ω)Channel crosstalk <-110 dB below full scale (with input source <50 Ω)Phase match between channels±0.75°, DC to cutoff frequency (typ.)GeneralInterfaces GPIB and RS-232 standard. All instrument functions can be controlled and read through the interfaces.Stored settings Nine complete dual-channel instrument configurations may be stored in non-volatile memory.Power 45 W, 100/120/220/240 VAC, 50/60 HzDimensions 15.7" × 3.0" × 14.0" (WHL)Weight 12 lbs.Warranty One year parts and labor on defects in materials and workmanship

Agilent 83497A 光电时钟恢复模块

Agilent 8157A 光衰减仪

Agilent 81637B 快速功率计

Agilent 34570A 数字万用表

Agilent 44476A 微波复用器模块

Agilent 70004A 光谱分析仪

Agilent 81000FI 光纤连接器

Agilent 81002FF 积分球

Agilent 81521B 光功率计探头

Agilent 81524A 光功率探头

Agilent 81525A 大功率光学探头

Agilent 81533A 接口模块

Agilent 81533B 接口模块

Agilent 81536A 光功率计传感插件

Agilent 81560A 可变光衰减器

Agilent 81567A 可变光衰减器模块

Agilent 8156A 光衰减器

Agilent 81578A可变光衰减器模块

Agilent 81610A回损测试模块

Agilent 81619A 光功率模块

Agilent 81624A 光学探头

Agilent 81625A 光功率探头

Agilent 81633A 分布式反馈(DFB)激光器

Agilent 81635A 双光功率传感器

Agilent 8163A光功率计主机

Agilent 8163B 光功率计

Agilent 8164A 光波测量系统主机

Agilent 81650A 单法布里-珀罗激光源

Agilent 81651A 光源模块

Agilent 81654A 法布里-珀罗激光源

Agilent 81662A 分布式反馈(DFB)激光器

Agilent 8168E 可调谐激光源

Agilent 83440D光波转换器

Agilent 83480A 数字通信分析仪

Agilent 83483A 双通道电模块

Agilent 83486A 光电模块

Agilent 83487A 光电模块

Agilent 83492A 多模时钟模块

Agilent 83493A 单模时钟恢复模块

Agilent 83494A 单模时钟恢复模块

Agilent 83495A 时钟恢复模块

Agilent 83496A 光电时钟恢复模块

Agilent 86100A 光示波器

Agilent 86100C 宽带示波器主机

Agilent 86103A 光电模块

Agilent 86103B 光电模块

Agilent 86105A 光电模块

Agilent 86105B 光电模块

Agilent 86106B 光电模块

Agilent 86107A 精密时基参考模块

Agilent 86120B 多波长计

Agilent 86120C 多波长计

Agilent 86142B 高性能光谱分析仪

Agilent 86146b 光谱分析仪

Agilent N7740 多端口光功率计

Ando AQ2140光功率计

Ando AQ2730光功率计模块

Ando AQ2742 光功率传感器

Ando AQ2743 光功率传感器

Ando AQ4211LD组件

Ando AQ4215 光功率计

Andu AQ-4137 光源

Andu AQ-4142 光源

Anritsu 69347B 信号源

Anritsu MN9610B光衰减器

Anritsu ms9710c 光谱分析仪

Anritsu MS9740A 台式光谱分析仪

CVI Melles Griot 05-LHP-211-1 激光器

Ericsson FSU-975 光纤熔接机

Exfo IQS-3150 可变衰减器

EXFO WA-1650 光波长计

HP 8153A 光功率计

HP 8153B 光波万用表

HP 81551MM 点光源模块

HP 83540A 插件信号源

HP 8595E 频谱分析仪

IFR GPS-101定位系统模拟器

Jdsu HA9 光衰减器

JDSU OLP-55 光功率计

Keithley 7001半导体开关系统

Keithley 2001A 数字多用表

Keithley 2400 数字源表

Keithley 2400-C 数字源表

Keithley 2500 数字源表

Keithley 2502 数字源表

KEITHLEY 6221 电流源表

Keysight 11708A 衰减器垫

Keysight 3458A 数字多用表

Keysight 34903A GP开关模块

Keysight 81570A 可变光衰减器模块

Keysight 81618A 接口模块

Keysight 81623B 锗光功率探头

Keysight 81630B 大功率光传感器

Keysight 81634B 低偏振相关光功率传感器

Keysight 81636B 光功率传感器

Keysight 8164B 光波测量系统主机

Keysight 82357B GPIB 卡

Keysight 86100D 宽带宽示波器主机

Keysight 86105C 光电采样模块

Keysight 86105D 光电模块

Keysight E3631A 三路输出电源

Keysight J7231B 抖动通信性能分析仪

Keysight N5181A 射频模拟信号发生器

Keysight N5980A 比特误码率测试仪

Keysight N7744A 多端口光功率计

Keysight N7748A 高性能光功率计

Newport 818-IG高性能光电二极管传感器

Newport 918-IG 高性能