咨询热线

18948178581

当前位置:首页  >  产品展示  >    >    >  srs SR570-Low noise current preamplifier

srs SR570-Low noise current preamplifier

简要描述:srs SR570-Low noise current preamplifier

  • 产品型号:SR570
  • 厂商性质:经销商
  • 更新时间:2023-12-20
  • 访  问  量:1007

详细介绍

  •  

srs SR570-Low noise current preamplifier

 

主要指标与说明The SR570 is a low-noise current preamplifier capable of current gains as large as 1 pA/V. High gain and bandwidth, low noise, and many convenient features make the SR570 ideal for a variety of photonic, low temperature and other measurements.

 

SR570 Current Preamplifier5 fA/√Hz input noise1 MHz maximum bandwidth1 pA/V maximum gainAdjustable bias voltageTwo configurable signal filtersVariable input offset currentLine or battery operationRS-232 interfaceSR570 Current PreamplifierThe SR570 is a low-noise current preamplifier capable of current gains as large as 1 pA/V. High gain and bandwidth, low noise, and many convenient features make the SR570 ideal for a variety of photonic, low temperature and other measurements.GainThe SR570 has sensitivity settings from 1 pA/V to 1 mA/V that can be selected in a 1-2-5 sequence. A vernier gain adjustment is also provided that lets you select any sensitivity in between.Gain can be allocated to various stages of the amplifier to optimize the instruments performance. The low noise mode places gain in the front end of the amplifier for the best noise performance. The high bandwidth mode allocates gain to the later stages of the amplifier to improve the frequency response of the front end. In the low drift mode, the input amplifier is replaced with a very low input-current op amp, reducing the instrument’s DC drift by up to a factor 1000.FiltersThe SR570 contains two first-order RC filters whose cutoff frequency and type can be configured from the front panel. Together, the filters can be configured as a 6 or 12 dB/oct rolloff low-pass or high-pass filter, or as a 6 dB/oct rolloff band-pass filter. Cutoff frequencies are adjustable from 0.03 Hz to 1 MHz in a 1-3-10 sequence. A filter reset button is included to shorten the overload recovery time of the instrument when long filter time constants are used.Input Offset and DC BiasAn input offset-current adjustment is provided to suppress any undesired DC background currents. Offset currents can be specified from ±1 pA to ±1 mA in roughly 0.1 % increments. The SR570 also has an adjustable input DC bias voltage (±5 V) that allows you to directly sink current into a virtual null (analog ground) or a selected DC bias.

 

Toggle and BlankingTwo rear-panel, opto-isolated TTL inputs provide additional control of the SR570. A blanking input lets you quickly turn off/on the instrument's gain which is useful in preventing front-end overloading. A toggle input inverts the sign of the gain in response to a TTL signal allowing you to perform synchronous detection with a chopped signal.Battery OperationThree rechargeable lead-acid batteries provide up to 15 hours of battery-powered operation. An internal battery charger automatically charges the batteries when the unit is connected to the line. The charger senses the battery state and adjusts the charging rate accordingly. Two rear-panel LEDs indicate the charge state of the batteries. When the batteries become discharged they are automatically disconnected from the amplifier circuit to avoid battery damage.No Digital NoiseThe microprocessor that runs the SR570 is "asleep" except during the brief interval it takes to change the instrument's setup. This ensures that no digital noise will contaminate low-level analog signals.RS-232 InterfaceThe RS-232 interface allows listen-only communication with the SR570 at 9600 baud. All functions of the instrument (except power on) can be set via the RS-232 interface. The RS-232 interface electronics are opto-isolated from the amplifier circuitry to provide maximum noise immunity.SR570 Current PreamplifierInputInputs Virtual null or user-set bias (±5 V)Input offset ±1 pA to ±1 mA adjustable DC offset currentMaximum input ±5 mANoise See graphsSensitivity 1 pA/V to 1 mA/V in 1-2-5 sequence (vernier adj. in 0.5 % steps)Frequency response ±0.5 dB to 1 MHz. Adjustable front-panel frequency response compensation for source capacitance.Grounding Amplifier ground is fully floating. Amplifier and chassis ground are available at rear panel. Input ground can float up to ±40 V.FiltersSignal filters 2 configurable (low-pass or high-pass) 6 dB/oct rolloff filters. -3 dB points are settable in a 1-3-10 sequence from 0.03 Hz to 1 MHz.Gain allocation Low noise Gain is allocated to the front end for best noise performance. High bandwidth Front-end gain is reduced for optimum frequency response. Low drift Low bias current amplifier is used for reduced drift at high sensitivity.Filter reset Long time constant filters may be reset with front-panel button.

 

OutputGain accuracy ±(0.5 % of output + 10 mV) @ 25°CDC drift see table belowMaximum output ±5 V into a high impedance loadGeneralExternal blanking TTL input sets gain to zeroExternal toggle TTL input inverts gain polarityRear panel biasing ±12 VDC @ 200 mA, referenced to amplifier groundComputer interface RS-232, 9600 baud, receive onlyPower 100/120/220/240 VAC, 6 watts charged, 30 watts while charging. Internal batteries provide 15 hours of operation between charges. Batteries are charged while connected to the line.Dimensions 8.3" × 3.5" × 13.0" (WHL)Weight 15 lbs. (batteries installed)Warranty One year parts and labor on defects in materials and workmanshipSensitivity(A/V) Bandwidth (-3 dB)* Noise/vHz** Temp. coefficient ± (%input + offset)/°C DC InputImpedance High BW Low Noise High BW Low Noise Low Drift (11 to 28 °C) All Modes10-3 1.0 MHz 1.0 MHz 150 pA 150 pA 0.01 % + 20 nA 1 Ω10-4 1.0 MHz 500 kHz 100 pA 60 pA 0.01 % + 2 nA 1 Ω10-5 800 kHz 200 kHz 60 pA 2 pA 0.01 % + 200 pA 100 Ω10-6 200 kHz 20 kHz 2 pA 600 fA 0.01 % + 20 pA 100 Ω10-7 20 kHz 2 kHz 600 fA 100 fA 0.01 % + 2 pA 10 kΩ10-8 2 kHz 200 Hz 100 fA 60 fA 0.01 % + 400 fA 10 kΩ10-9 200 Hz 15 Hz 60 fA 10 fA 0.025 % + 40 fA 1 MΩ10-10 100 Hz 10 Hz 10 fA 5 fA 0.025 % + 20 fA 1 MΩ10-11 20 Hz 10 Hz 10 fA 5 fA 0.040 % + 20 fA 1 MΩ10-12 10 Hz 10 Hz 5 fA 5 fA 0.040 % + 20 fA 1 MΩ

 

Agilent 83497A 光电时钟恢复模块

 

Agilent 8157A 光衰减仪

 

Agilent 81637B 快速功率计

 

Agilent 34570A 数字万用表

 

Agilent 44476A 微波复用器模块

 

Agilent 70004A 光谱分析仪

 

Agilent 81000FI 光纤连接器

 

Agilent 81002FF 积分球

 

Agilent 81521B 光功率计探头

 

Agilent 81524A 光功率探头

 

Agilent 81525A 大功率光学探头

 

Agilent 81533A 接口模块

 

Agilent 81533B 接口模块

 

Agilent 81536A 光功率计传感插件

 

Agilent 81560A 可变光衰减器

 

Agilent 81567A 可变光衰减器模块

 

Agilent 8156A 光衰减器

 

Agilent 81578A可变光衰减器模块

 

Agilent 81610A回损测试模块

 

Agilent 81619A 光功率模块

 

Agilent 81624A 光学探头

 

Agilent 81625A 光功率探头

 

Agilent 81633A 分布式反馈(DFB)激光器

 

Agilent 81635A 双光功率传感器

 

Agilent 8163A光功率计主机

 

Agilent 8163B 光功率计

 

Agilent 8164A 光波测量系统主机

 

Agilent 81650A 单法布里-珀罗激光源

 

Agilent 81651A 光源模块

 

Agilent 81654A 法布里-珀罗激光源

 

Agilent 81662A 分布式反馈(DFB)激光器

 

Agilent 8168E 可调谐激光源

 

Agilent 83440D光波转换器

 

Agilent 83480A 数字通信分析仪

 

Agilent 83483A 双通道电模块

 

Agilent 83486A 光电模块

 

Agilent 83487A 光电模块

 

Agilent 83492A 多模时钟模块

 

Agilent 83493A 单模时钟恢复模块

 

Agilent 83494A 单模时钟恢复模块

 

Agilent 83495A 时钟恢复模块

 

Agilent 83496A 光电时钟恢复模块

 

Agilent 86100A 光示波器

 

Agilent 86100C 宽带示波器主机

 

Agilent 86103A 光电模块

 

Agilent 86103B 光电模块

 

Agilent 86105A 光电模块

 

Agilent 86105B 光电模块

 

Agilent 86106B 光电模块

 

Agilent 86107A 精密时基参考模块

 

Agilent 86120B 多波长计

 

Agilent 86120C 多波长计

 

Agilent 86142B 高性能光谱分析仪

 

Agilent 86146b 光谱分析仪

 

Agilent N7740 多端口光功率计

 

Ando AQ2140光功率计

 

Ando AQ2730光功率计模块

 

Ando AQ2742 光功率传感器

 

Ando AQ2743 光功率传感器

 

Ando AQ4211LD组件

 

Ando AQ4215 光功率计

 

Andu AQ-4137 光源

 

Andu AQ-4142 光源

 

Anritsu 69347B 信号源

 

Anritsu MN9610B光衰减器

 

Anritsu ms9710c 光谱分析仪

 

Anritsu MS9740A 台式光谱分析仪

 

CVI Melles Griot 05-LHP-211-1 激光器

 

Ericsson FSU-975 光纤熔接机

 

Exfo IQS-3150 可变衰减器

 

EXFO WA-1650 光波长计

 

HP 8153A 光功率计

 

HP 8153B 光波万用表

 

HP 81551MM 点光源模块

 

HP 83540A 插件信号源

 

HP 8595E 频谱分析仪

 

IFR GPS-101定位系统模拟器

 

Jdsu HA9 光衰减器

 

JDSU OLP-55 光功率计

 

Keithley 7001半导体开关系统

 

Keithley 2001A 数字多用表

 

Keithley 2400 数字源表

 

Keithley 2400-C 数字源表

 

Keithley 2500 数字源表

 

Keithley 2502 数字源表

 

KEITHLEY 6221 电流源表

 

Keysight 11708A 衰减器垫

 

Keysight 3458A 数字多用表

 

Keysight 34903A GP开关模块

 

Keysight 81570A 可变光衰减器模块

 

Keysight 81618A 接口模块

 

Keysight 81623B 锗光功率探头

 

Keysight 81630B 大功率光传感器

 

Keysight 81634B 低偏振相关光功率传感器

 

Keysight 81636B 光功率传感器

 

Keysight 8164B 光波测量系统主机

 

Keysight 82357B GPIB 卡

 

Keysight 86100D 宽带宽示波器主机

 

Keysight 86105C 光电采样模块

 

Keysight 86105D 光电模块

 

Keysight E3631A 三路输出电源

 

Keysight J7231B 抖动通信性能分析仪

 

Keysight N5181A 射频模拟信号发生器

 

Keysight N5980A 比特误码率测试仪

 

Keysight N7744A 多端口光功率计

 

Keysight N7748A 高性能光功率计

 

Newport 818-IG高性能光电二极管传感器

 

Newport 918-IG 高性能光电二极管传感器

 

Newport 918-ir 高性能光电二极管传感器

 

NI PCI GPIB小卡

 

NI PXI-1

产品咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7